Skip to content
EPCMap

How energy efficient are homes in AL6 0 (Welwyn)?

Summary

Average rating

D65

AL6 average: D 67

Homes in AL6 0 have an average EPC rating of D (65), a little below the AL6 average of D (67).

Rated D or worse
59%
AL6: 51%
Typical yearly energy cost
£1,744
EPCs since 2021, at prices then
Built before 1930
11%

For landlords: 58% of privately rented homes here are below C (118 homes), the minimum from October 2030. See the 2030 rules

How ratings are spread

Share of homes in each band, with the score range for each. The dark line marks the AL6 average.

  • Band A, score 92 to 100: <1% of homes; AL6 <1%.
  • Band B, score 81 to 91: 11% of homes; AL6 15%.
  • Band C, score 69 to 80: 30% of homes; AL6 34%.
  • Band D, score 55 to 68: 43% of homes; AL6 36%.
  • Band E, score 39 to 54: 12% of homes; AL6 11%.
  • Band F, score 21 to 38: 3% of homes; AL6 3%.
  • Band G, score 1 to 20: <1% of homes; AL6 <1%.

Based on the latest energy performance certificate (EPC) for each of 1,723 homes, up to October 2026. EPCs rate homes from A (most efficient) to G (least), with a score out of 100. AL6 0 is a postcode sector: every postcode that starts AL6 0.

Other postcode sectors in AL6

AL6 0 has the lowest average rating of the 2 sectors in AL6 with enough EPCs to show.

What homes here are like

What EPC assessors recorded when they visited homes in AL6 0.

Main heating

Gas boiler91%
Oil boiler3%
Other or unrecorded2%
Heat pump2%
Electric storage heaters2%

Walls, roof and windows

Solid walls, not insulated12%
Cavity walls, not insulated24%
Cavity walls, insulated48%
Solid walls, insulated2%
Other walls (timber, system-built or modern)14%
Loft insulation under 100 mm (homes with a loft)18%
Double or triple glazing throughout85%
Solar panels2%

Ratings by type of home

Flats usually rate higher than houses because they lose less heat through shared walls, floors and ceilings.

Type of homeShare of homesAverage ratingRated D or worse
Detached house57%D 65AL6: D 6559%
Semi-detached house12%D 66AL6: D 6760%
Terraced house8%D 67AL6: C 6951%
Bungalow16%D 60AL6: D 6276%
Flat or maisonette7%C 73AL6: C 7428%

Typical floor area is the median. Types with fewer than 20 homes here aren't shown.

Privately rented homes and the 2030 standard

Landlords need an EPC rating of at least E to let a home today. From 1 October 2030, privately rented homes in England and Wales will need a C or better, unless the landlord registers an exemption.

58%

of privately rented homes here are below C (118 homes)

AL6: 54%

  • 96% of those could reach C with the upgrades listed on their EPC.
  • 3% are rated F or G, below today's minimum of E (AL6: 2%).

From homes whose latest EPC was for a private let. A home sold or let differently since may be counted in the wrong group. The 2030 standard will be measured with new EPC metrics, so treat these figures as a guide. Landlord guidance on GOV.UK

Upgrades recommended for homes in AL6 0

Where AL6 0 differs from the rest of AL6. For every upgrade and its typical cost, see AL6.

  • Cavity wall insulation

    On 25% of EPCs here (AL6: 19%). 24% of homes here have unfilled cavity walls.

    Typical cost: £500–£1,500

With all its recommended upgrades, 92% of homes here could reach a C rating or better.

On EPCs issued since 2021, making every recommended upgrade would cut the typical home's energy cost by about £242 a year, at the prices used when each EPC was issued.

Map of AL6 0 and nearby areas

How AL6 0 compares with the postcode sectors around it.

AL10 0, Hatfield: C 70AL10 9, Hatfield: C 72AL3 6, St. Albans: D 68AL4 8, St. Albans: D 66AL4 9, St. Albans: D 67AL6 9, Welwyn: D 68AL7 1, Welwyn Garden City: C 71AL7 2, Welwyn Garden City: C 69AL7 3, Welwyn Garden City: C 72AL7 4, Welwyn Garden City: C 72AL8 6, Welwyn Garden City: D 67AL8 7, Welwyn Garden City: D 65AL9 5, Hatfield: D 67AL9 6, Hatfield: D 62EN11 8, Hoddesdon: C 69SG1 1, Stevenage: C 71SG1 2, Stevenage: C 70SG11 1, Ware: D 66SG12 0, Ware: D 63SG12 9, Ware: D 68SG13 7, Hertford: C 69SG13 8, Hertford: D 65SG14 1, Hertford: C 70SG14 2, Hertford: C 69SG14 3, Hertford: D 66SG2 7, Stevenage: D 66SG2 8, Stevenage: C 69SG2 9, Stevenage: D 68SG3 6, Knebworth: D 68SG4 7, Hitchin: D 63SG4 8, Hitchin: D 67AL4 8D 66AL6 9D 68AL7 1C 71AL7 4C 72AL8 7D 65SG14 2C 69SG14 3D 66SG2 8C 69SG3 6D 68SG4 8D 67AL6 0D 65AL4 8D 66AL4 9D 67AL6 9D 68AL7 1C 71AL7 3C 72AL7 4C 72AL8 6D 67SG12 0D 63SG14 2C 69SG14 3D 66SG2 8C 69SG3 6D 68SG4 8D 67AL6 0D 65
Colour shows each area's average rating. Tap an area to open it. A 92–100 B 81–91 C 69–80 D 55–68 E 39–54 F 21–38 G 1–20 AL6 0 Not enough EPCs

Bordering postcode sectors

Common questions

What holds energy ratings back in AL6 0?

Older homes, uninsulated walls and lofts, and electric or oil heating all pull ratings down.

What is a postcode sector?

A postcode sector is the part of a postcode before the last two letters. AL6 0 covers every postcode that starts AL6 0, usually a few thousand homes. It's part of the AL6 postcode district.

Can I see the rating for my own home?

Yes. Individual certificates are on the official EPC Register on GOV.UK. EPCMap only shows figures for whole areas.