Skip to content
EPCMap

How energy efficient are homes in AL3 6 (St. Albans, St Albans)?

Summary

Average rating

D68

AL3 average: D 66

Homes in AL3 6 have an average EPC rating of D (68), a little above the AL3 average of D (66).

Rated D or worse
44%
AL3: 54%
Typical yearly energy cost
£1,164
EPCs since 2021, at prices then
Built before 1930
8%

For landlords: 47% of privately rented homes here are below C (169 homes), the minimum from October 2030. See the 2030 rules

How ratings are spread

Share of homes in each band, with the score range for each. The dark line marks the AL3 average.

  • Band A, score 92 to 100: <1% of homes; AL3 <1%.
  • Band B, score 81 to 91: 12% of homes; AL3 9%.
  • Band C, score 69 to 80: 44% of homes; AL3 37%.
  • Band D, score 55 to 68: 33% of homes; AL3 39%.
  • Band E, score 39 to 54: 9% of homes; AL3 13%.
  • Band F, score 21 to 38: 2% of homes; AL3 2%.
  • Band G, score 1 to 20: <1% of homes; AL3 <1%.

Based on the latest energy performance certificate (EPC) for each of 1,369 homes, up to October 2026. EPCs rate homes from A (most efficient) to G (least), with a score out of 100. AL3 6 is a postcode sector: every postcode that starts AL3 6.

Other postcode sectors in AL3

AL3 6 has the highest average rating of the 5 sectors in AL3 with enough EPCs to show.

What homes here are like

What EPC assessors recorded when they visited homes in AL3 6.

Main heating

Gas boiler85%
Oil boiler5%
Other electric heating3%
Communal or district heating3%
Heat pump2%
Electric storage heaters1%

Walls, roof and windows

Solid walls, not insulated15%
Cavity walls, not insulated16%
Cavity walls, insulated44%
Solid walls, insulated2%
Other walls (timber, system-built or modern)24%
Loft insulation under 100 mm (homes with a loft)16%
Double or triple glazing throughout89%

Ratings by type of home

Flats usually rate higher than houses because they lose less heat through shared walls, floors and ceilings.

Type of homeShare of homesAverage ratingRated D or worse
Detached house14%D 61AL3: D 6367%
Semi-detached house32%D 66AL3: D 6551%
Terraced house25%C 69AL3: D 6639%
Bungalow6%D 66AL3: D 6342%
Flat or maisonette23%C 74AL3: C 7025%

Typical floor area is the median. Types with fewer than 20 homes here aren't shown.

Privately rented homes and the 2030 standard

Landlords need an EPC rating of at least E to let a home today. From 1 October 2030, privately rented homes in England and Wales will need a C or better, unless the landlord registers an exemption.

47%

of privately rented homes here are below C (169 homes)

AL3: 60%

  • 93% of those could reach C with the upgrades listed on their EPC.
  • 3% are rated F or G, below today's minimum of E (AL3: 1%).

From homes whose latest EPC was for a private let. A home sold or let differently since may be counted in the wrong group. The 2030 standard will be measured with new EPC metrics, so treat these figures as a guide. Landlord guidance on GOV.UK

Upgrades recommended for homes in AL3 6

Where AL3 6 differs from the rest of AL3. For every upgrade and its typical cost, see AL3.

  • Solid wall insulation (internal or external)

    On 17% of EPCs here (AL3: 30%). 14% of homes here have solid walls with no insulation.

    Typical cost: £4,000–£14,000
  • Double glazing

    On 9% of EPCs here (AL3: 15%). 11% of homes aren't fully double or triple glazed.

    Typical cost: £3,300–£6,500

With all its recommended upgrades, 94% of homes here could reach a C rating or better.

On EPCs issued since 2021, making every recommended upgrade would cut the typical home's energy cost by about £160 a year, at the prices used when each EPC was issued.

Map of AL3 6 and nearby areas

How AL3 6 compares with the postcode sectors around it.

AL1 1, St. Albans: D 66AL1 2, St. Albans: D 68AL1 3, St. Albans: C 71AL1 4, St. Albans: D 63AL1 5, St. Albans: D 68AL10 0, Hatfield: C 70AL10 8, Hatfield: C 70AL10 9, Hatfield: C 72AL2 1, St. Albans: D 68AL2 2, St. Albans: C 69AL2 3, St. Albans: D 67AL3 4, St. Albans: D 66AL3 5, St. Albans: D 65AL3 7, St. Albans: D 65AL3 8, St. Albans: D 65AL4 0, St. Albans: C 70AL4 8, St. Albans: D 66AL4 9, St. Albans: D 67AL5 1, Harpenden: D 66AL5 2, Harpenden: D 67AL5 3, Harpenden: D 66AL5 4, Harpenden: D 67AL5 5, Harpenden: D 66AL6 9, Welwyn: D 68AL7 4, Welwyn Garden City: C 72AL8 6, Welwyn Garden City: D 67AL8 7, Welwyn Garden City: D 65AL9 5, Hatfield: D 67AL9 7, Hatfield: D 66EN6 2, Potters Bar: D 64EN6 3, Potters Bar: D 65HP1 1, Hemel Hempstead: D 68HP1 2, Hemel Hempstead: C 69HP1 3, Hemel Hempstead: D 67HP1 9: not enough EPCs to showHP2 4, Hemel Hempstead: C 72HP2 5, Hemel Hempstead: C 69HP2 6, Hemel Hempstead: D 68HP2 7, Hemel Hempstead: C 71HP3 0, Hemel Hempstead: D 68HP3 8, Hemel Hempstead: D 66HP3 9, Hemel Hempstead: C 69HP4 2, Berkhamsted: D 68LU1 4, Luton: C 70LU2 9, Luton: D 66LU6 2, Dunstable: D 64SG4 8, Hitchin: D 67WD25 0, Watford: D 67WD25 7, Watford: C 71WD25 8, Watford: D 64WD25 9, Watford: C 70WD3 4, Rickmansworth: D 64WD4 8, Kings Langley: D 68WD4 9, Kings Langley: D 63WD5 0, Abbots Langley: D 66WD7 7, Radlett: D 66WD7 9, Radlett: D 68AL1 1D 66AL10 9C 72AL2 1D 68AL2 2C 69AL3 7D 65AL3 8D 65AL4 0C 70AL4 8D 66AL5 1D 66AL8 7D 65HP2 6D 68HP3 8D 66HP3 9C 69WD5 0D 66AL3 6D 68AL1 1D 66AL1 4D 63AL10 9C 72AL2 1D 68AL2 2C 69AL2 3D 67AL3 4D 66AL3 7D 65AL3 8D 65AL4 0C 70AL4 8D 66AL4 9D 67AL5 1D 66AL5 2D 67AL5 3D 66AL5 4D 67AL8 7D 65HP1 1D 68HP2 4C 72HP2 6D 68HP2 7C 71HP3 8D 66HP3 9C 69WD5 0D 66AL3 6D 68
Colour shows each area's average rating. Tap an area to open it. A 92–100 B 81–91 C 69–80 D 55–68 E 39–54 F 21–38 G 1–20 AL3 6 Not enough EPCs

Bordering postcode sectors

Common questions

What holds energy ratings back in AL3 6?

Older homes, uninsulated walls and lofts, and electric or oil heating all pull ratings down.

What is a postcode sector?

A postcode sector is the part of a postcode before the last two letters. AL3 6 covers every postcode that starts AL3 6, usually a few thousand homes. It's part of the AL3 postcode district.

Can I see the rating for my own home?

Yes. Individual certificates are on the official EPC Register on GOV.UK. EPCMap only shows figures for whole areas.