Skip to content
EPCMap

How energy efficient are homes in WD25 0 (Watford)?

Summary

Average rating

D67

WD25 average: C 69

Homes in WD25 0 have an average EPC rating of D (67), a little below the WD25 average of C (69). 35% of homes here have solid walls with no insulation.

Rated D or worse
52%
WD25: 44%
Typical yearly energy cost
£1,013
EPCs since 2021, at prices then
Built before 1930
6%

For landlords: 43% of privately rented homes here are below C (359 homes), the minimum from October 2030. See the 2030 rules

How ratings are spread

Share of homes in each band, with the score range for each. The dark line marks the WD25 average.

  • Band A, score 92 to 100: 0% of homes; WD25 <1%.
  • Band B, score 81 to 91: 11% of homes; WD25 18%.
  • Band C, score 69 to 80: 37% of homes; WD25 38%.
  • Band D, score 55 to 68: 41% of homes; WD25 34%.
  • Band E, score 39 to 54: 10% of homes; WD25 9%.
  • Band F, score 21 to 38: <1% of homes; WD25 <1%.
  • Band G, score 1 to 20: 0% of homes; WD25 <1%.

Based on the latest energy performance certificate (EPC) for each of 2,247 homes, up to October 2026. EPCs rate homes from A (most efficient) to G (least), with a score out of 100. WD25 0 is a postcode sector: every postcode that starts WD25 0.

Other postcode sectors in WD25

WD25 0 has the 3rd highest average rating of the 4 sectors in WD25 with enough EPCs to show.

What homes here are like

What EPC assessors recorded when they visited homes in WD25 0.

Main heating

Gas boiler92%
Electric storage heaters5%
Other electric heating2%

Walls, roof and windows

Solid walls, not insulated35%
Cavity walls, not insulated13%
Cavity walls, insulated39%
Solid walls, insulated1%
Other walls (timber, system-built or modern)12%
Loft insulation under 100 mm (homes with a loft)22%
Double or triple glazing throughout91%

Ratings by type of home

Flats usually rate higher than houses because they lose less heat through shared walls, floors and ceilings.

Type of homeShare of homesAverage ratingRated D or worse
Detached house10%D 66WD25: D 6760%
Semi-detached house33%D 63WD25: D 6468%
Terraced house25%D 68WD25: C 6946%
Bungalow4%D 65WD25: D 6570%
Flat or maisonette28%C 71WD25: C 7335%

Typical floor area is the median. Types with fewer than 20 homes here aren't shown.

Privately rented homes and the 2030 standard

Landlords need an EPC rating of at least E to let a home today. From 1 October 2030, privately rented homes in England and Wales will need a C or better, unless the landlord registers an exemption.

43%

of privately rented homes here are below C (359 homes)

WD25: 40%

  • 96% of those could reach C with the upgrades listed on their EPC.
  • 0% are rated F or G, below today's minimum of E (WD25: <1%).

From homes whose latest EPC was for a private let. A home sold or let differently since may be counted in the wrong group. The 2030 standard will be measured with new EPC metrics, so treat these figures as a guide. Landlord guidance on GOV.UK

Upgrades recommended for homes in WD25 0

Where WD25 0 differs from the rest of WD25. For every upgrade and its typical cost, see WD25.

  • Solid wall insulation (internal or external)

    On 36% of EPCs here (WD25: 19%). 35% of homes here have solid walls with no insulation.

    Typical cost: £4,000–£14,000

With all its recommended upgrades, 94% of homes here could reach a C rating or better.

On EPCs issued since 2021, making every recommended upgrade would cut the typical home's energy cost by about £183 a year, at the prices used when each EPC was issued.

Map of WD25 0 and nearby areas

How WD25 0 compares with the postcode sectors around it.

AL1 1, St. Albans: D 66AL1 2, St. Albans: D 68AL2 1, St. Albans: D 68AL2 2, St. Albans: C 69AL2 3, St. Albans: D 67HP3 0, Hemel Hempstead: D 68HP3 8, Hemel Hempstead: D 66HP3 9, Hemel Hempstead: C 69WD17 1, Watford: C 73WD17 3, Watford: D 61WD17 4, Watford: D 68WD23 2, Bushey: C 70WD24 4, Watford: C 70WD24 5, Watford: D 67WD24 6, Watford: D 66WD24 7, Watford: D 62WD25 7, Watford: C 71WD25 8, Watford: D 64WD25 9, Watford: C 70WD3 3, Rickmansworth: D 65WD3 4, Rickmansworth: D 64WD3 6, Rickmansworth: D 60WD4 8, Kings Langley: D 68WD4 9, Kings Langley: D 63WD5 0, Abbots Langley: D 66WD6 3, Borehamwood: D 65WD7 7, Radlett: D 66WD7 8, Radlett: D 67AL2 2C 69AL2 3D 67WD17 3D 61WD24 7D 62WD25 8D 64WD25 9C 70WD4 8D 68WD5 0D 66WD25 0D 67AL2 2C 69AL2 3D 67WD17 3D 61WD17 4D 68WD24 4C 70WD24 7D 62WD25 7C 71WD25 8D 64WD25 9C 70WD4 8D 68WD5 0D 66WD7 8D 67WD25 0D 67
Colour shows each area's average rating. Tap an area to open it. A 92–100 B 81–91 C 69–80 D 55–68 E 39–54 F 21–38 G 1–20 WD25 0 Not enough EPCs

Bordering postcode sectors

Common questions

What holds energy ratings back in WD25 0?

About 35% of homes here have solid walls with no insulation, which lose much more heat than insulated walls. Older homes, uninsulated walls and lofts, and electric or oil heating all pull ratings down.

What is a postcode sector?

A postcode sector is the part of a postcode before the last two letters. WD25 0 covers every postcode that starts WD25 0, usually a few thousand homes. It's part of the WD25 postcode district.

Can I see the rating for my own home?

Yes. Individual certificates are on the official EPC Register on GOV.UK. EPCMap only shows figures for whole areas.