Skip to content
EPCMap

How energy efficient are homes in CM2 0 (Chelmsford)?

Summary

Average rating

D68

CM2 average: D 67

Homes in CM2 0 have an average EPC rating of D (68), about the same as the CM2 average of D (67). 60% of homes here are flats or maisonettes, and 35% have solid walls with no insulation.

Rated D or worse
47%
CM2: 48%
Typical yearly energy cost
£917
EPCs since 2021, at prices then
Built before 1930
28%

For landlords: 55% of privately rented homes here are below C (660 homes), the minimum from October 2030. See the 2030 rules

How ratings are spread

Share of homes in each band, with the score range for each. The dark line marks the CM2 average.

  • Band A, score 92 to 100: <1% of homes; CM2 <1%.
  • Band B, score 81 to 91: 14% of homes; CM2 10%.
  • Band C, score 69 to 80: 38% of homes; CM2 42%.
  • Band D, score 55 to 68: 34% of homes; CM2 36%.
  • Band E, score 39 to 54: 11% of homes; CM2 10%.
  • Band F, score 21 to 38: 1% of homes; CM2 2%.
  • Band G, score 1 to 20: <1% of homes; CM2 <1%.

Based on the latest energy performance certificate (EPC) for each of 2,868 homes, up to October 2026. EPCs rate homes from A (most efficient) to G (least), with a score out of 100. CM2 0 is a postcode sector: every postcode that starts CM2 0.

Other postcode sectors in CM2

CM2 0 has the 2nd highest average rating of the 6 sectors in CM2 with enough EPCs to show.

What homes here are like

What EPC assessors recorded when they visited homes in CM2 0.

Main heating

Gas boiler66%
Electric storage heaters12%
Other electric heating10%
Communal or district heating8%
Oil boiler4%

Walls, roof and windows

Solid walls, not insulated35%
Cavity walls, not insulated8%
Cavity walls, insulated35%
Solid walls, insulated2%
Other walls (timber, system-built or modern)21%
Loft insulation under 100 mm (homes with a loft)26%
Double or triple glazing throughout86%

Ratings by type of home

Flats usually rate higher than houses because they lose less heat through shared walls, floors and ceilings.

Type of homeShare of homesAverage ratingRated D or worse
Detached house5%D 58CM2: D 6481%
Semi-detached house14%D 59CM2: D 6385%
Terraced house20%D 63CM2: D 6771%
Bungalow2%D 63CM2: D 6271%
Flat or maisonette60%C 72CM2: C 7327%

Typical floor area is the median. Types with fewer than 20 homes here aren't shown.

Privately rented homes and the 2030 standard

Landlords need an EPC rating of at least E to let a home today. From 1 October 2030, privately rented homes in England and Wales will need a C or better, unless the landlord registers an exemption.

55%

of privately rented homes here are below C (660 homes)

CM2: 51%

  • 92% of those could reach C with the upgrades listed on their EPC.
  • &lt;1% are rated F or G, below today's minimum of E (CM2: <1%).

From homes whose latest EPC was for a private let. A home sold or let differently since may be counted in the wrong group. The 2030 standard will be measured with new EPC metrics, so treat these figures as a guide. Landlord guidance on GOV.UK

Upgrades recommended for homes in CM2 0

Where CM2 0 differs from the rest of CM2. For every upgrade and its typical cost, see CM2.

  • Solar panels (PV)

    On 39% of EPCs here (CM2: 64%).

    Typical cost: £5,000–£8,000
  • Solar water heating

    On 33% of EPCs here (CM2: 55%).

    Typical cost: £4,000–£6,000
  • Solid wall insulation (internal or external)

    On 37% of EPCs here (CM2: 20%). 35% of homes here have solid walls with no insulation.

    Typical cost: £4,000–£14,000
  • Floor insulation

    On 36% of EPCs here (CM2: 52%).

    Typical cost: £4,000–£6,000
  • Cavity wall insulation

    On 9% of EPCs here (CM2: 17%). 8% of homes here have unfilled cavity walls.

    Typical cost: £500–£1,500

With all its recommended upgrades, 92% of homes here could reach a C rating or better.

On EPCs issued since 2021, making every recommended upgrade would cut the typical home's energy cost by about £162 a year, at the prices used when each EPC was issued.

Map of CM2 0 and nearby areas

How CM2 0 compares with the postcode sectors around it.

CM1 1, Chelmsford: C 76CM1 2, Chelmsford: D 68CM1 3, Chelmsford: D 66CM1 4, Chelmsford: D 66CM1 7, Chelmsford: D 67CM2 6, Chelmsford: C 69CM2 7, Chelmsford: D 66CM2 8, Chelmsford: D 66CM2 9, Chelmsford: D 67CM4 0, Ingatestone: D 64CM1 1C 76CM1 2D 68CM2 9D 67CM2 0D 68CM1 1C 76CM1 2D 68CM2 9D 67CM2 0D 68
Colour shows each area's average rating. Tap an area to open it. A 92–100 B 81–91 C 69–80 D 55–68 E 39–54 F 21–38 G 1–20 CM2 0 Not enough EPCs

Bordering postcode sectors

Common questions

What holds energy ratings back in CM2 0?

About 35% of homes here have solid walls with no insulation, which lose much more heat than insulated walls. Older homes, uninsulated walls and lofts, and electric or oil heating all pull ratings down.

What is a postcode sector?

A postcode sector is the part of a postcode before the last two letters. CM2 0 covers every postcode that starts CM2 0, usually a few thousand homes. It's part of the CM2 postcode district.

Can I see the rating for my own home?

Yes. Individual certificates are on the official EPC Register on GOV.UK. EPCMap only shows figures for whole areas.