Skip to content
EPCMap

How energy efficient are homes in HP11 1 (High Wycombe, Buckinghamshire)?

Summary

Average rating

C72

HP11 average: C 71

Homes in HP11 1 have an average EPC rating of C (72), about the same as the HP11 average of C (71).

Rated D or worse
32%
HP11: 36%
Typical yearly energy cost
£740
EPCs since 2021, at prices then
Built before 1930
7%

For landlords: 38% of privately rented homes here are below C (613 homes), the minimum from October 2030. See the 2030 rules

How ratings are spread

Share of homes in each band, with the score range for each. The dark line marks the HP11 average.

  • Band A, score 92 to 100: 2% of homes; HP11 <1%.
  • Band B, score 81 to 91: 27% of homes; HP11 22%.
  • Band C, score 69 to 80: 39% of homes; HP11 41%.
  • Band D, score 55 to 68: 24% of homes; HP11 27%.
  • Band E, score 39 to 54: 7% of homes; HP11 9%.
  • Band F, score 21 to 38: <1% of homes; HP11 <1%.
  • Band G, score 1 to 20: <1% of homes; HP11 <1%.

Based on the latest energy performance certificate (EPC) for each of 3,832 homes, up to October 2026. EPCs rate homes from A (most efficient) to G (least), with a score out of 100. HP11 1 is a postcode sector: every postcode that starts HP11 1.

Other postcode sectors in HP11

HP11 1 has the highest average rating of the 2 sectors in HP11 with enough EPCs to show.

What homes here are like

What EPC assessors recorded when they visited homes in HP11 1.

Main heating

Gas boiler77%
Electric storage heaters9%
Other electric heating7%
Communal or district heating3%
Oil boiler1%
Other or unrecorded1%

Walls, roof and windows

Solid walls, not insulated8%
Cavity walls, not insulated15%
Cavity walls, insulated47%
Other walls (timber, system-built or modern)30%
Loft insulation under 100 mm (homes with a loft)19%
Double or triple glazing throughout94%

Ratings by type of home

Flats usually rate higher than houses because they lose less heat through shared walls, floors and ceilings.

Type of homeShare of homesAverage ratingRated D or worse
Detached house16%C 69HP11: D 6749%
Semi-detached house14%C 70HP11: D 6547%
Terraced house17%C 73HP11: C 7034%
Bungalow3%D 61HP11: D 6160%
Flat or maisonette49%C 74HP11: C 7422%

Typical floor area is the median. Types with fewer than 20 homes here aren't shown.

Privately rented homes and the 2030 standard

Landlords need an EPC rating of at least E to let a home today. From 1 October 2030, privately rented homes in England and Wales will need a C or better, unless the landlord registers an exemption.

38%

of privately rented homes here are below C (613 homes)

HP11: 43%

  • 91% of those could reach C with the upgrades listed on their EPC.
  • 0% are rated F or G, below today's minimum of E (HP11: <1%).

From homes whose latest EPC was for a private let. A home sold or let differently since may be counted in the wrong group. The 2030 standard will be measured with new EPC metrics, so treat these figures as a guide. Landlord guidance on GOV.UK

Upgrades recommended for homes in HP11 1

Where HP11 1 differs from the rest of HP11. For every upgrade and its typical cost, see HP11.

  • Solid wall insulation (internal or external)

    On 9% of EPCs here (HP11: 14%). 8% of homes here have solid walls with no insulation.

    Typical cost: £4,000–£14,000

With all its recommended upgrades, 96% of homes here could reach a C rating or better.

On EPCs issued since 2021, making every recommended upgrade would cut the typical home's energy cost by about £70 a year, at the prices used when each EPC was issued.

Map of HP11 1 and nearby areas

How HP11 1 compares with the postcode sectors around it.

HP10 0, High Wycombe: D 66HP10 8, High Wycombe: D 65HP10 9, High Wycombe: C 69HP11 2, High Wycombe: C 69HP12 3, High Wycombe: D 67HP12 4, High Wycombe: D 66HP13 5, High Wycombe: C 69HP13 6, High Wycombe: D 66HP13 7, High Wycombe: C 69HP14 3, High Wycombe: D 64HP14 4, High Wycombe: D 64HP15 6, High Wycombe: D 65HP15 7, High Wycombe: D 66HP7 0, Amersham: D 64HP9 1, Beaconsfield: D 68HP9 2, Beaconsfield: D 68SL1 8, Slough: D 65SL6 9, Maidenhead: D 63SL7 1, Marlow: D 66SL7 2, Marlow: D 64SL7 3, Marlow: D 66SL8 5, Bourne End: D 65HP10 0D 66HP10 8D 65HP10 9C 69HP12 4D 66HP13 5C 69HP13 7C 69HP15 7D 66SL7 3D 66HP11 1C 72HP10 0D 66HP10 8D 65HP10 9C 69HP11 2C 69HP12 4D 66HP13 5C 69HP13 6D 66HP13 7C 69HP15 7D 66SL7 3D 66HP11 1C 72
Colour shows each area's average rating. Tap an area to open it. A 92–100 B 81–91 C 69–80 D 55–68 E 39–54 F 21–38 G 1–20 HP11 1 Not enough EPCs

Bordering postcode sectors

Common questions

What holds energy ratings back in HP11 1?

Older homes, uninsulated walls and lofts, and electric or oil heating all pull ratings down.

What is a postcode sector?

A postcode sector is the part of a postcode before the last two letters. HP11 1 covers every postcode that starts HP11 1, usually a few thousand homes. It's part of the HP11 postcode district.

Can I see the rating for my own home?

Yes. Individual certificates are on the official EPC Register on GOV.UK. EPCMap only shows figures for whole areas.