How energy efficient are homes in W1G 0 (London, Westminster)?
Summary
Average rating
C70
W1G average: D 66
Homes in W1G 0 have an average EPC rating of C (70), a little above the W1G average of D (66). 94% of homes here are flats or maisonettes, and 41% have solid walls with no insulation.
- Rated D or worse
- 35%
- W1G: 46%
- Homes with an EPC
- 51
- Built before 1930
- 47%
For landlords: too few local figures; in W1G, 45% of privately rented homes are below C, the minimum from October 2030. See the 2030 rules
How ratings are spread
Share of homes in each band, with the score range for each. The dark line marks the W1G average.
- Band A, score 92 to 100: 0% of homes; W1G <1%.
- Band B, score 81 to 91: 26% of homes; W1G 6%.
- Band C, score 69 to 80: 39% of homes; W1G 48%.
- Band D, score 55 to 68: 24% of homes; W1G 31%.
- Band E, score 39 to 54: 8% of homes; W1G 13%.
- Band F, score 21 to 38: 4% of homes; W1G 2%.
- Band G, score 1 to 20: 0% of homes; W1G <1%.
Based on the latest energy performance certificate (EPC) for each of 51 homes, up to October 2026. EPCs rate homes from A (most efficient) to G (least), with a score out of 100. W1G 0 is a postcode sector: every postcode that starts W1G 0. With only 51 homes, these percentages can change a lot when a few new certificates arrive.
Other postcode sectors in W1G
W1G 0 has the highest average rating of the 5 sectors in W1G with enough EPCs to show.
What homes here are like
What EPC assessors recorded when they visited homes in W1G 0.
Main heating
Walls, roof and windows
Ratings by type of home
Flats usually rate higher than houses because they lose less heat through shared walls, floors and ceilings.
| Type of home | Share of homes | Average rating | Rated D or worse | Typical floor area |
|---|---|---|---|---|
| Flat or maisonette | 94% | C 71W1G: D 66 | 33% | 174 m² |
Typical floor area is the median. Types with fewer than 20 homes here aren't shown.
Privately rented homes and the 2030 standard
Landlords need an EPC rating of at least E to let a home today. From 1 October 2030, privately rented homes in England and Wales will need a C or better, unless the landlord registers an exemption.
Too few privately rented homes in W1G 0 have an EPC to show local figures. In W1G, 45% of privately rented homes are below C. Landlord guidance on GOV.UK
Upgrades recommended for homes in W1G 0
Where W1G 0 differs from the rest of W1G. For every upgrade and its typical cost, see W1G.
- Double glazing
On 22% of EPCs here (W1G: 56%). 41% of homes aren't fully double or triple glazed.
Typical cost: £3,300–£6,500 - Solid wall insulation (internal or external)
On 41% of EPCs here (W1G: 67%). 41% of homes here have solid walls with no insulation.
Typical cost: £4,000–£14,000 - New condensing boiler
On 29% of EPCs here (W1G: 15%).
Typical cost: £2,200–£3,000 - Roof insulation (flat roof or room in roof)
On 6% of EPCs here (W1G: 15%).
Typical cost: £900–£1,500 - Solar panels (PV)
On 6% of EPCs here (W1G: 12%).
Typical cost: £5,000–£8,000
With all its recommended upgrades, 82% of homes here could reach a C rating or better.
There aren't enough EPCs from the last 5 years in W1G 0 to estimate typical savings.
Map of W1G 0 and nearby areas
How W1G 0 compares with the postcode sectors around it.
Bordering postcode sectors
Common questions
What holds energy ratings back in W1G 0?
About 41% of homes here have solid walls with no insulation, which lose much more heat than insulated walls. 47% were built before 1930. Older homes, uninsulated walls and lofts, and electric or oil heating all pull ratings down.
What is a postcode sector?
A postcode sector is the part of a postcode before the last two letters. W1G 0 covers every postcode that starts W1G 0, usually a few thousand homes. It's part of the W1G postcode district.
Can I see the rating for my own home?
Yes. Individual certificates are on the official EPC Register on GOV.UK. EPCMap only shows figures for whole areas.