Skip to content
EPCMap

How energy efficient are homes in WS2 0 (Walsall)?

Summary

Average rating

D67

WS2 average: D 68

Homes in WS2 0 have an average EPC rating of D (67), about the same as the WS2 average of D (68).

Rated D or worse
51%
WS2: 48%
Typical yearly energy cost
£1,069
EPCs since 2021, at prices then
Built before 1930
2%

For landlords: 54% of privately rented homes here are below C (273 homes), the minimum from October 2030. See the 2030 rules

How ratings are spread

Share of homes in each band, with the score range for each. The dark line marks the WS2 average.

  • Band A, score 92 to 100: <1% of homes; WS2 <1%.
  • Band B, score 81 to 91: 10% of homes; WS2 11%.
  • Band C, score 69 to 80: 39% of homes; WS2 40%.
  • Band D, score 55 to 68: 41% of homes; WS2 36%.
  • Band E, score 39 to 54: 8% of homes; WS2 10%.
  • Band F, score 21 to 38: 1% of homes; WS2 1%.
  • Band G, score 1 to 20: <1% of homes; WS2 <1%.

Based on the latest energy performance certificate (EPC) for each of 2,688 homes, up to October 2026. EPCs rate homes from A (most efficient) to G (least), with a score out of 100. WS2 0 is a postcode sector: every postcode that starts WS2 0.

Other postcode sectors in WS2

WS2 0 is level with another sector for the 2nd highest average rating of the 4 sectors in WS2 with enough EPCs to show.

What homes here are like

What EPC assessors recorded when they visited homes in WS2 0.

Main heating

Gas boiler94%
Communal or district heating2%
Other electric heating2%
Electric storage heaters1%
Other or unrecorded1%

Walls, roof and windows

Solid walls, not insulated8%
Cavity walls, not insulated16%
Cavity walls, insulated52%
Solid walls, insulated5%
Other walls (timber, system-built or modern)20%
Loft insulation under 100 mm (homes with a loft)18%
Double or triple glazing throughout93%
Solar panels2%

Ratings by type of home

Flats usually rate higher than houses because they lose less heat through shared walls, floors and ceilings.

Type of homeShare of homesAverage ratingRated D or worse
Detached house2%D 65WS2: D 6767%
Semi-detached house50%D 65WS2: D 6763%
Terraced house24%C 69WS2: D 6545%
Bungalow4%D 66WS2: D 6766%
Flat or maisonette21%C 73WS2: C 7324%

Typical floor area is the median. Types with fewer than 20 homes here aren't shown.

Privately rented homes and the 2030 standard

Landlords need an EPC rating of at least E to let a home today. From 1 October 2030, privately rented homes in England and Wales will need a C or better, unless the landlord registers an exemption.

54%

of privately rented homes here are below C (273 homes)

WS2: 52%

  • 88% of those could reach C with the upgrades listed on their EPC.
  • &lt;1% are rated F or G, below today's minimum of E (WS2: <1%).

From homes whose latest EPC was for a private let. A home sold or let differently since may be counted in the wrong group. The 2030 standard will be measured with new EPC metrics, so treat these figures as a guide. Landlord guidance on GOV.UK

Upgrades recommended for homes in WS2 0

Where WS2 0 differs from the rest of WS2. For every upgrade and its typical cost, see WS2.

  • Solid wall insulation (internal or external)

    On 10% of EPCs here (WS2: 20%). 8% of homes here have solid walls with no insulation.

    Typical cost: £4,000–£14,000

With all its recommended upgrades, 95% of homes here could reach a C rating or better.

On EPCs issued since 2021, making every recommended upgrade would cut the typical home's energy cost by about £103 a year, at the prices used when each EPC was issued.

Map of WS2 0 and nearby areas

How WS2 0 compares with the postcode sectors around it.

WS1 1, Walsall: D 65WS1 3, Walsall: D 63WS1 4, Walsall: D 64WS10 7, Wednesbury: D 68WS10 8, Wednesbury: D 67WS10 9, Wednesbury: D 63WS2 7, Walsall: C 70WS2 8, Walsall: D 67WS2 9, Walsall: D 66WS3 1, Walsall: C 71WS3 2, Walsall: D 66WS4 2, Walsall: D 64WS5 4, Walsall: D 67WV11 2, Wolverhampton: D 68WV11 3, Wolverhampton: D 68WV12 4, Willenhall: D 66WV12 5, Willenhall: D 65WV13 1, Willenhall: D 67WV13 2, Willenhall: D 66WV13 3, Willenhall: D 64WV14 0, Bilston: C 71WV14 6, Bilston: D 65WV14 7, Bilston: D 67WS1 4D 64WS2 7C 70WS2 8D 67WS2 9D 66WV12 4D 66WV13 1D 67WV13 2D 66WS2 0D 67WS1 4D 64WS2 7C 70WS2 8D 67WS2 9D 66WV11 3D 68WV12 4D 66WV13 1D 67WV13 2D 66WS2 0D 67
Colour shows each area's average rating. Tap an area to open it. A 92–100 B 81–91 C 69–80 D 55–68 E 39–54 F 21–38 G 1–20 WS2 0 Not enough EPCs

Bordering postcode sectors

Common questions

What holds energy ratings back in WS2 0?

Older homes, uninsulated walls and lofts, and electric or oil heating all pull ratings down.

What is a postcode sector?

A postcode sector is the part of a postcode before the last two letters. WS2 0 covers every postcode that starts WS2 0, usually a few thousand homes. It's part of the WS2 postcode district.

Can I see the rating for my own home?

Yes. Individual certificates are on the official EPC Register on GOV.UK. EPCMap only shows figures for whole areas.