Skip to content
EPCMap

How energy efficient are homes in SY10 0 (Oswestry, Shropshire)?

Summary

Average rating

E50

SY10 average: D 58

Homes in SY10 0 have an average EPC rating of E (50), well below the SY10 average of D (58). 50% of homes here were built before 1930, and 46% have solid walls with no insulation.

Rated D or worse
82%
SY10: 66%
Typical yearly energy cost
£1,875
EPCs since 2021, at prices then
Built before 1930
50%

For landlords: 98% of privately rented homes here are below C (81 homes), the minimum from October 2030. See the 2030 rules

How ratings are spread

Share of homes in each band, with the score range for each. The dark line marks the SY10 average.

  • Band A, score 92 to 100: 2% of homes; SY10 1%.
  • Band B, score 81 to 91: 6% of homes; SY10 10%.
  • Band C, score 69 to 80: 9% of homes; SY10 22%.
  • Band D, score 55 to 68: 26% of homes; SY10 31%.
  • Band E, score 39 to 54: 30% of homes; SY10 21%.
  • Band F, score 21 to 38: 18% of homes; SY10 10%.
  • Band G, score 1 to 20: 9% of homes; SY10 5%.

Based on the latest energy performance certificate (EPC) for each of 730 homes, up to October 2026. EPCs rate homes from A (most efficient) to G (least), with a score out of 100. SY10 0 is a postcode sector: every postcode that starts SY10 0.

Other postcode sectors in SY10

SY10 0 has the lowest average rating of the 4 sectors in SY10 with enough EPCs to show.

What homes here are like

What EPC assessors recorded when they visited homes in SY10 0.

Main heating

Oil boiler73%
Heat pump10%
Electric storage heaters10%
Other electric heating3%
Solid fuel or wood2%
Communal or district heating1%

Walls, roof and windows

Solid walls, not insulated46%
Cavity walls, not insulated10%
Cavity walls, insulated30%
Solid walls, insulated5%
Other walls (timber, system-built or modern)9%
Loft insulation under 100 mm (homes with a loft)20%
Double or triple glazing throughout79%
Solar panels5%

Ratings by type of home

Flats usually rate higher than houses because they lose less heat through shared walls, floors and ceilings.

Type of homeShare of homesAverage ratingRated D or worse
Detached house52%E 45SY10: E 5486%
Semi-detached house19%E 53SY10: D 6085%
Terraced house10%E 51SY10: D 6487%
Bungalow18%D 62SY10: D 6066%

Typical floor area is the median. Types with fewer than 20 homes here aren't shown.

Privately rented homes and the 2030 standard

Landlords need an EPC rating of at least E to let a home today. From 1 October 2030, privately rented homes in England and Wales will need a C or better, unless the landlord registers an exemption.

98%

of privately rented homes here are below C (81 homes)

SY10: 84%

  • 89% of those could reach C with the upgrades listed on their EPC.
  • 20% are rated F or G, below today's minimum of E (SY10: 10%).

From homes whose latest EPC was for a private let. A home sold or let differently since may be counted in the wrong group. The 2030 standard will be measured with new EPC metrics, so treat these figures as a guide. Landlord guidance on GOV.UK

Upgrades recommended for homes in SY10 0

Where SY10 0 differs from the rest of SY10. For every upgrade and its typical cost, see SY10.

  • Solid wall insulation (internal or external)

    On 47% of EPCs here (SY10: 30%). 46% of homes here have solid walls with no insulation.

    Typical cost: £4,000–£14,000
  • Heating controls

    On 30% of EPCs here (SY10: 23%).

    Typical cost: £350–£450
  • Roof insulation (flat roof or room in roof)

    On 16% of EPCs here (SY10: 10%).

    Typical cost: £900–£1,500
  • Insulated external doors

    On 12% of EPCs here (SY10: 6%).

    Typical cost: £1,500

With all its recommended upgrades, 84% of homes here could reach a C rating or better.

On EPCs issued since 2021, making every recommended upgrade would cut the typical home's energy cost by about £545 a year, at the prices used when each EPC was issued.

Map of SY10 0 and nearby areas

How SY10 0 compares with the postcode sectors around it.

LL11 3, Wrexham: D 65LL13 0, Wrexham: D 61LL13 7, Wrexham: D 67LL13 8, Wrexham: C 70LL13 9, Wrexham: D 67LL14 1, Wrexham: D 63LL14 2, Wrexham: D 67LL14 3, Wrexham: D 67LL14 4, Wrexham: D 66LL14 5, Wrexham: D 63LL14 6, Wrexham: D 67LL15 2, Ruthin: E 54LL20 7, Llangollen: E 54LL20 8, Llangollen: D 62LL21 0, Corwen: E 53LL21 9, Corwen: E 51LL23 7, Bala: D 55LL24 0, Betws-Y-Coed: E 47LL25 0, Dolwyddelan: E 45LL36 9, Tywyn: E 54LL40 1, Dolgellau: D 58LL40 2, Dolgellau: E 48LL41 3, Blaenau Ffestiniog: D 55LL41 4, Blaenau Ffestiniog: E 53SY10 1: not enough EPCs to showSY10 7, Oswestry: D 60SY10 8, Oswestry: D 55SY10 9, Oswestry: D 62SY11 1, Oswestry: D 65SY11 2, Oswestry: D 67SY11 3, Oswestry: C 69SY11 4, Oswestry: D 65SY12 9, Ellesmere: D 63SY15 6, Montgomery: D 57SY16 3, Newtown: D 57SY17 5, Caersws: D 57SY19 7, Llanbrynmair: E 51SY20 8, Machynlleth: D 56SY20 9, Machynlleth: E 44SY21 0, Welshpool: E 51SY21 7, Welshpool: D 68SY21 8, Welshpool: E 54SY21 9, Welshpool: D 58SY22 5, Llanfyllin: D 56SY22 6, Llanymynech: D 59SY4 1, Shrewsbury: D 62SY5 0, Shrewsbury: D 64SY5 9, Shrewsbury: D 59LL20 7E 54LL21 0E 53LL23 7D 55SY10 8D 55SY20 9E 44SY21 0E 51SY21 8E 54SY22 6D 59SY10 0E 50LL14 1D 63LL14 5D 63LL20 7E 54LL21 0E 53LL23 7D 55SY10 7D 60SY10 8D 55SY10 9D 62SY20 9E 44SY21 0E 51SY21 8E 54SY22 5D 56SY22 6D 59SY10 0E 50
Colour shows each area's average rating. Tap an area to open it. A 92–100 B 81–91 C 69–80 D 55–68 E 39–54 F 21–38 G 1–20 SY10 0 Not enough EPCs

Bordering postcode sectors

Common questions

What holds energy ratings back in SY10 0?

About 46% of homes here have solid walls with no insulation, which lose much more heat than insulated walls. 50% were built before 1930. Older homes, uninsulated walls and lofts, and electric or oil heating all pull ratings down.

What is a postcode sector?

A postcode sector is the part of a postcode before the last two letters. SY10 0 covers every postcode that starts SY10 0, usually a few thousand homes. It's part of the SY10 postcode district.

Can I see the rating for my own home?

Yes. Individual certificates are on the official EPC Register on GOV.UK. EPCMap only shows figures for whole areas.