Skip to content
EPCMap

How energy efficient are homes in IG1 3 (Ilford, Redbridge)?

Summary

Average rating

D64

IG1 average: D 67

Homes in IG1 3 have an average EPC rating of D (64), a little below the IG1 average of D (67). 54% of homes here are flats or maisonettes, and 84% have solid walls with no insulation.

Rated D or worse
64%
IG1: 52%
Typical yearly energy cost
£952
EPCs since 2021, at prices then
Built before 1930
53%

For landlords: 60% of privately rented homes here are below C (2,052 homes), the minimum from October 2030. See the 2030 rules

How ratings are spread

Share of homes in each band, with the score range for each. The dark line marks the IG1 average.

  • Band A, score 92 to 100: 0% of homes; IG1 <1%.
  • Band B, score 81 to 91: 2% of homes; IG1 11%.
  • Band C, score 69 to 80: 34% of homes; IG1 37%.
  • Band D, score 55 to 68: 51% of homes; IG1 42%.
  • Band E, score 39 to 54: 11% of homes; IG1 9%.
  • Band F, score 21 to 38: 2% of homes; IG1 <1%.
  • Band G, score 1 to 20: <1% of homes; IG1 <1%.

Based on the latest energy performance certificate (EPC) for each of 4,190 homes, up to October 2026. EPCs rate homes from A (most efficient) to G (least), with a score out of 100. IG1 3 is a postcode sector: every postcode that starts IG1 3.

Other postcode sectors in IG1

IG1 3 has the lowest average rating of the 4 sectors in IG1 with enough EPCs to show.

What homes here are like

What EPC assessors recorded when they visited homes in IG1 3.

Main heating

Gas boiler90%
Other electric heating4%
Communal or district heating3%
Electric storage heaters2%

Walls, roof and windows

Solid walls, not insulated84%
Cavity walls, not insulated5%
Cavity walls, insulated5%
Solid walls, insulated3%
Other walls (timber, system-built or modern)4%
Loft insulation under 100 mm (homes with a loft)45%
Double or triple glazing throughout86%

Ratings by type of home

Flats usually rate higher than houses because they lose less heat through shared walls, floors and ceilings.

Type of homeShare of homesAverage ratingRated D or worse
Semi-detached house9%D 58IG1: D 5985%
Terraced house36%D 62IG1: D 6374%
Flat or maisonette54%D 66IG1: C 7154%

Typical floor area is the median. Types with fewer than 20 homes here aren't shown.

Privately rented homes and the 2030 standard

Landlords need an EPC rating of at least E to let a home today. From 1 October 2030, privately rented homes in England and Wales will need a C or better, unless the landlord registers an exemption.

60%

of privately rented homes here are below C (2,052 homes)

IG1: 53%

  • 88% of those could reach C with the upgrades listed on their EPC.
  • &lt;1% are rated F or G, below today's minimum of E (IG1: <1%).

From homes whose latest EPC was for a private let. A home sold or let differently since may be counted in the wrong group. The 2030 standard will be measured with new EPC metrics, so treat these figures as a guide. Landlord guidance on GOV.UK

Upgrades recommended for homes in IG1 3

Where IG1 3 differs from the rest of IG1. For every upgrade and its typical cost, see IG1.

  • Solid wall insulation (internal or external)

    On 83% of EPCs here (IG1: 62%). 84% of homes here have solid walls with no insulation.

    Typical cost: £4,000–£14,000
  • Floor insulation

    On 52% of EPCs here (IG1: 40%).

    Typical cost: £4,000–£6,000
  • New condensing boiler

    On 23% of EPCs here (IG1: 17%).

    Typical cost: £2,200–£3,000

With all its recommended upgrades, 90% of homes here could reach a C rating or better.

On EPCs issued since 2021, making every recommended upgrade would cut the typical home's energy cost by about £223 a year, at the prices used when each EPC was issued.

Map of IG1 3 and nearby areas

How IG1 3 compares with the postcode sectors around it.

E11 1, London: D 65E11 2, London: D 64E11 3, London: D 66E11 4, London: D 66E12 5, London: D 67E12 6, London: D 65E15 1, London: C 73E15 4, London: C 69E17 3, London: C 70E18 1, London: D 64E18 2, London: D 67E7 0, London: D 66E7 8, London: D 65E7 9, London: D 66IG1 1, Ilford: D 67IG1 2, Ilford: C 70IG1 4, Ilford: D 66IG11 8, Barking: C 73IG11 9, Barking: D 64IG2 6, Ilford: D 67IG2 7, Ilford: D 65IG3 8, Ilford: D 68IG3 9, Ilford: D 65IG4 5, Ilford: D 63IG5 0, Ilford: D 64IG6 1, Ilford: D 67E11 2D 64E11 3D 66E12 5D 67E7 0D 66IG1 1D 67IG1 2C 70IG1 4D 66IG2 6D 67IG4 5D 63IG6 1D 67IG1 3D 64E11 2D 64E11 3D 66E12 5D 67E7 0D 66IG1 1D 67IG1 2C 70IG1 4D 66IG2 6D 67IG4 5D 63IG6 1D 67IG1 3D 64
Colour shows each area's average rating. Tap an area to open it. A 92–100 B 81–91 C 69–80 D 55–68 E 39–54 F 21–38 G 1–20 IG1 3 Not enough EPCs

Bordering postcode sectors

Common questions

What holds energy ratings back in IG1 3?

About 84% of homes here have solid walls with no insulation, which lose much more heat than insulated walls. 53% were built before 1930. Older homes, uninsulated walls and lofts, and electric or oil heating all pull ratings down.

What is a postcode sector?

A postcode sector is the part of a postcode before the last two letters. IG1 3 covers every postcode that starts IG1 3, usually a few thousand homes. It's part of the IG1 postcode district.

Can I see the rating for my own home?

Yes. Individual certificates are on the official EPC Register on GOV.UK. EPCMap only shows figures for whole areas.