Skip to content
EPCMap

How energy efficient are homes in ME3 0 (Rochester, Medway)?

Summary

Average rating

D64

ME3 average: C 69

Homes in ME3 0 have an average EPC rating of D (64), well below the ME3 average of C (69).

Rated D or worse
59%
ME3: 41%
Typical yearly energy cost
£886
EPCs since 2021, at prices then
Built before 1930
4%

For landlords: about 7 in 10 privately rented homes here are below C (44 homes), the minimum from October 2030. See the 2030 rules

How ratings are spread

Share of homes in each band, with the score range for each. The dark line marks the ME3 average.

  • Band A, score 92 to 100: <1% of homes; ME3 <1%.
  • Band B, score 81 to 91: 11% of homes; ME3 23%.
  • Band C, score 69 to 80: 29% of homes; ME3 36%.
  • Band D, score 55 to 68: 42% of homes; ME3 29%.
  • Band E, score 39 to 54: 12% of homes; ME3 9%.
  • Band F, score 21 to 38: 3% of homes; ME3 2%.
  • Band G, score 1 to 20: 1% of homes; ME3 <1%.

Based on the latest energy performance certificate (EPC) for each of 511 homes, up to October 2026. EPCs rate homes from A (most efficient) to G (least), with a score out of 100. ME3 0 is a postcode sector: every postcode that starts ME3 0.

Other postcode sectors in ME3

ME3 0 has the 3rd highest average rating of the 4 sectors in ME3 with enough EPCs to show.

What homes here are like

What EPC assessors recorded when they visited homes in ME3 0.

Main heating

Gas boiler81%
Electric storage heaters7%
Heat pump7%
Other electric heating2%
Oil boiler2%
Communal or district heating1%

Walls, roof and windows

Solid walls, not insulated6%
Cavity walls, not insulated34%
Cavity walls, insulated42%
Solid walls, insulated1%
Other walls (timber, system-built or modern)18%
Loft insulation under 100 mm (homes with a loft)29%
Double or triple glazing throughout94%
Solar panels1%

Ratings by type of home

Flats usually rate higher than houses because they lose less heat through shared walls, floors and ceilings.

Type of homeShare of homesAverage ratingRated D or worse
Detached house13%D 67ME3: C 7254%
Semi-detached house37%D 63ME3: D 6861%
Terraced house32%D 65ME3: C 7058%
Bungalow14%D 63ME3: D 6361%
Flat or maisonette4%D 63ME3: C 7565%

Typical floor area is the median. Types with fewer than 20 homes here aren't shown.

Privately rented homes and the 2030 standard

Landlords need an EPC rating of at least E to let a home today. From 1 October 2030, privately rented homes in England and Wales will need a C or better, unless the landlord registers an exemption.

About 7 in 10

privately rented homes here are below C (44 homes)

ME3: 49%

  • Almost all of those could reach C with the upgrades listed on their EPC.
  • Fewer than 1 in 10 are rated F or G, below today's minimum of E (ME3: 2%).

From homes whose latest EPC was for a private let. With under 50 homes, we round to the nearest tenth. A home sold or let differently since may be counted in the wrong group. The 2030 standard will be measured with new EPC metrics, so treat these figures as a guide. Landlord guidance on GOV.UK

Upgrades recommended for homes in ME3 0

Where ME3 0 differs from the rest of ME3. For every upgrade and its typical cost, see ME3.

  • Floor insulation

    On 68% of EPCs here (ME3: 47%).

    Typical cost: £4,000–£6,000
  • Cavity wall insulation

    On 35% of EPCs here (ME3: 19%). 34% of homes here have unfilled cavity walls.

    Typical cost: £500–£1,500
  • Loft insulation top-up

    On 28% of EPCs here (ME3: 15%). 29% of homes with a loft have less than 100 mm of insulation.

    Typical cost: £100–£350
  • Heating controls

    On 26% of EPCs here (ME3: 15%).

    Typical cost: £350–£450
  • New condensing boiler

    On 30% of EPCs here (ME3: 21%).

    Typical cost: £2,200–£3,000

With all its recommended upgrades, 96% of homes here could reach a C rating or better.

On EPCs issued since 2021, making every recommended upgrade would cut the typical home's energy cost by about £160 a year, at the prices used when each EPC was issued.

Map of ME3 0 and nearby areas

How ME3 0 compares with the postcode sectors around it.

ME10 2, Sittingbourne: C 69ME11 5, Queenborough: D 67ME12 1, Sheerness: D 66ME12 2, Sheerness: D 64ME12 3, Sheerness: C 71ME12 4, Sheerness: D 64ME12 6, Minster-On-Sea: B 91ME13 0, Faversham: D 56ME3 8, Rochester: C 71ME3 9, Rochester: C 72ME4 3, Chatham: C 77ME4 4, Chatham: C 76ME4 5, Chatham: D 65ME5 7, Chatham: D 67ME7 1, Gillingham: D 68ME7 2, Gillingham: D 66ME7 4, Gillingham: D 62ME7 5, Gillingham: D 65ME8 6, Gillingham: D 66ME8 7, Gillingham: D 68ME8 8, Gillingham: C 69ME9 7, Sittingbourne: D 64ME9 8, Sittingbourne: C 71ME9 9, Sittingbourne: D 65SS8 0, Canvey Island: D 62SS8 7, Canvey Island: D 62ME11 5D 67ME12 2D 64ME12 3C 71ME3 9C 72ME7 2D 66ME3 0D 64ME11 5D 67ME12 1D 66ME12 2D 64ME12 3C 71ME3 8C 71ME3 9C 72ME7 1D 68ME3 0D 64
Colour shows each area's average rating. Tap an area to open it. A 92–100 B 81–91 C 69–80 D 55–68 E 39–54 F 21–38 G 1–20 ME3 0 Not enough EPCs

Bordering postcode sectors

Common questions

What holds energy ratings back in ME3 0?

Older homes, uninsulated walls and lofts, and electric or oil heating all pull ratings down.

What is a postcode sector?

A postcode sector is the part of a postcode before the last two letters. ME3 0 covers every postcode that starts ME3 0, usually a few thousand homes. It's part of the ME3 postcode district.

Can I see the rating for my own home?

Yes. Individual certificates are on the official EPC Register on GOV.UK. EPCMap only shows figures for whole areas.