Skip to content
EPCMap

How energy efficient are homes in CM9 8 (Maldon)?

Summary

Average rating

D57

CM9 average: D 67

Homes in CM9 8 have an average EPC rating of D (57), well below the CM9 average of D (67).

Rated D or worse
77%
CM9: 51%
Typical yearly energy cost
£1,378
EPCs since 2021, at prices then
Built before 1930
20%

For landlords: 92% of privately rented homes here are below C (206 homes), the minimum from October 2030. See the 2030 rules

How ratings are spread

Share of homes in each band, with the score range for each. The dark line marks the CM9 average.

  • Band A, score 92 to 100: <1% of homes; CM9 3%.
  • Band B, score 81 to 91: 9% of homes; CM9 19%.
  • Band C, score 69 to 80: 14% of homes; CM9 27%.
  • Band D, score 55 to 68: 37% of homes; CM9 33%.
  • Band E, score 39 to 54: 28% of homes; CM9 14%.
  • Band F, score 21 to 38: 11% of homes; CM9 4%.
  • Band G, score 1 to 20: 2% of homes; CM9 <1%.

Based on the latest energy performance certificate (EPC) for each of 2,566 homes, up to October 2026. EPCs rate homes from A (most efficient) to G (least), with a score out of 100. CM9 8 is a postcode sector: every postcode that starts CM9 8.

Other postcode sectors in CM9

CM9 8 has the lowest average rating of the 4 sectors in CM9 with enough EPCs to show.

What homes here are like

What EPC assessors recorded when they visited homes in CM9 8.

Main heating

Oil boiler70%
Heat pump12%
Electric storage heaters9%
Other electric heating5%
Gas boiler4%

Walls, roof and windows

Solid walls, not insulated15%
Cavity walls, not insulated15%
Cavity walls, insulated50%
Solid walls, insulated3%
Other walls (timber, system-built or modern)17%
Loft insulation under 100 mm (homes with a loft)16%
Double or triple glazing throughout86%
Solar panels5%

Ratings by type of home

Flats usually rate higher than houses because they lose less heat through shared walls, floors and ceilings.

Type of homeShare of homesAverage ratingRated D or worse
Detached house38%D 58CM9: D 6674%
Semi-detached house27%D 56CM9: D 6680%
Terraced house10%E 54CM9: D 6685%
Bungalow18%D 57CM9: D 6379%
Flat or maisonette7%D 60CM9: C 7269%

Typical floor area is the median. Types with fewer than 20 homes here aren't shown.

Privately rented homes and the 2030 standard

Landlords need an EPC rating of at least E to let a home today. From 1 October 2030, privately rented homes in England and Wales will need a C or better, unless the landlord registers an exemption.

92%

of privately rented homes here are below C (206 homes)

CM9: 65%

  • 89% of those could reach C with the upgrades listed on their EPC.
  • 8% are rated F or G, below today's minimum of E (CM9: 4%).

From homes whose latest EPC was for a private let. A home sold or let differently since may be counted in the wrong group. The 2030 standard will be measured with new EPC metrics, so treat these figures as a guide. Landlord guidance on GOV.UK

Upgrades recommended for homes in CM9 8

Where CM9 8 differs from the rest of CM9. For every upgrade and its typical cost, see CM9.

  • Floor insulation

    On 68% of EPCs here (CM9: 50%).

    Typical cost: £4,000–£6,000
  • New condensing boiler

    On 41% of EPCs here (CM9: 27%).

    Typical cost: £2,200–£3,000
  • Hot water cylinder insulation

    On 24% of EPCs here (CM9: 12%).

    Typical cost: £15–£30
  • Loft insulation top-up

    On 22% of EPCs here (CM9: 14%). 16% of homes with a loft have less than 100 mm of insulation.

    Typical cost: £100–£350
  • Heating controls

    On 22% of EPCs here (CM9: 17%).

    Typical cost: £350–£450

With all its recommended upgrades, 83% of homes here could reach a C rating or better.

On EPCs issued since 2021, making every recommended upgrade would cut the typical home's energy cost by about £286 a year, at the prices used when each EPC was issued.

Map of CM9 8 and nearby areas

How CM9 8 compares with the postcode sectors around it.

CM0 7, Southminster: D 61CM0 8, Burnham-On-Crouch: D 68CM1 6, Chelmsford: C 73CM11 1, Billericay: D 66CM2 5, Chelmsford: D 66CM2 6, Chelmsford: C 69CM2 7, Chelmsford: D 66CM2 8, Chelmsford: D 66CM3 1, Chelmsford: D 62CM3 2, Chelmsford: D 65CM3 3, Chelmsford: C 71CM3 4, Chelmsford: D 63CM3 5, Chelmsford: D 66CM3 6, Chelmsford: D 64CM3 7, Chelmsford: D 68CM3 8, Chelmsford: D 63CM7 1, Braintree: C 69CM7 2, Braintree: C 70CM7 3, Braintree: C 69CM7 5, Braintree: C 69CM7 9, Braintree: D 66CM77 6, Braintree: D 65CM77 7, Braintree: C 69CM77 8, Braintree: C 70CM8 1, Witham: C 70CM8 2, Witham: C 69CM8 3, Witham: C 69CM9 4, Maldon: C 71CM9 5, Maldon: D 64CM9 6, Maldon: C 70CM98 1: not enough EPCs to showCO1 2, Colchester: D 67CO16 8, Clacton-On-Sea: D 63CO2 0, Colchester: D 63CO2 7, Colchester: C 70CO2 8, Colchester: C 70CO2 9, Colchester: C 73CO3 0, Colchester: C 69CO3 3, Colchester: D 65CO3 4, Colchester: D 63CO3 8, Colchester: B 81CO3 9, Colchester: D 68CO4 3, Colchester: C 70CO5 0, Colchester: C 69CO5 7, Colchester: D 66CO5 8, Colchester: D 63CO5 9, Colchester: D 68CO6 1, Colchester: D 66CO6 3, Colchester: D 64CO7 0, Colchester: D 65CO7 7, Colchester: D 68CO7 8, Colchester: C 70CO7 9, Colchester: D 66SS11 7, Wickford: C 70SS4 3, Rochford: D 65SS5 5, Hockley: D 61SS5 6, Hockley: D 68CM0 7D 61CM3 2D 65CM3 4D 63CM3 6D 64CM3 8D 63CM8 3C 69CM9 6C 70CO2 0D 63CO5 8D 63CO5 9D 68CM9 8D 57CM0 7D 61CM2 7D 66CM3 2D 65CM3 5D 66CM3 6D 64CM7 3C 69CM8 2C 69CM9 4C 71CM9 6C 70CO2 0D 63CO2 8C 70CO5 0C 69CO5 7D 66CO5 8D 63CO5 9D 68CO7 0D 65CM9 8D 57
Colour shows each area's average rating. Tap an area to open it. A 92–100 B 81–91 C 69–80 D 55–68 E 39–54 F 21–38 G 1–20 CM9 8 Not enough EPCs

Bordering postcode sectors

Common questions

What holds energy ratings back in CM9 8?

Older homes, uninsulated walls and lofts, and electric or oil heating all pull ratings down.

What is a postcode sector?

A postcode sector is the part of a postcode before the last two letters. CM9 8 covers every postcode that starts CM9 8, usually a few thousand homes. It's part of the CM9 postcode district.

Can I see the rating for my own home?

Yes. Individual certificates are on the official EPC Register on GOV.UK. EPCMap only shows figures for whole areas.