Skip to content
EPCMap

How energy efficient are homes in SE10 0 (London, Greenwich)?

Summary

Average rating

C80

SE10 average: C 77

Homes in SE10 0 have an average EPC rating of C (80), a little above the SE10 average of C (77). 88% of homes here are flats or maisonettes.

Rated D or worse
10%
SE10: 20%
Typical yearly energy cost
£476
EPCs since 2021, at prices then
Built before 1930
8%

For landlords: 12% of privately rented homes here are below C (1,778 homes), the minimum from October 2030. See the 2030 rules

How ratings are spread

Share of homes in each band, with the score range for each. The dark line marks the SE10 average.

  • Band A, score 92 to 100: <1% of homes; SE10 <1%.
  • Band B, score 81 to 91: 70% of homes; SE10 55%.
  • Band C, score 69 to 80: 19% of homes; SE10 25%.
  • Band D, score 55 to 68: 8% of homes; SE10 15%.
  • Band E, score 39 to 54: 2% of homes; SE10 4%.
  • Band F, score 21 to 38: <1% of homes; SE10 <1%.
  • Band G, score 1 to 20: <1% of homes; SE10 <1%.

Based on the latest energy performance certificate (EPC) for each of 9,892 homes, up to October 2026. EPCs rate homes from A (most efficient) to G (least), with a score out of 100. SE10 0 is a postcode sector: every postcode that starts SE10 0.

Other postcode sectors in SE10

SE10 0 has the highest average rating of the 3 sectors in SE10 with enough EPCs to show.

What homes here are like

What EPC assessors recorded when they visited homes in SE10 0.

Main heating

Communal or district heating78%
Gas boiler17%
Other electric heating2%
Heat pump2%

Walls, roof and windows

Solid walls, not insulated10%
Cavity walls, not insulated2%
Cavity walls, insulated8%
Other walls (timber, system-built or modern)80%
Loft insulation under 100 mm (homes with a loft)40%
Double or triple glazing throughout97%

Ratings by type of home

Flats usually rate higher than houses because they lose less heat through shared walls, floors and ceilings.

Type of homeShare of homesAverage ratingRated D or worse
Semi-detached house<1%D 65SE10: D 6048%
Terraced house12%D 67SE10: D 6453%
Flat or maisonette88%B 82SE10: C 794%

Typical floor area is the median. Types with fewer than 20 homes here aren't shown.

Privately rented homes and the 2030 standard

Landlords need an EPC rating of at least E to let a home today. From 1 October 2030, privately rented homes in England and Wales will need a C or better, unless the landlord registers an exemption.

12%

of privately rented homes here are below C (1,778 homes)

SE10: 26%

  • 88% of those could reach C with the upgrades listed on their EPC.
  • &lt;1% are rated F or G, below today's minimum of E (SE10: <1%).

From homes whose latest EPC was for a private let. A home sold or let differently since may be counted in the wrong group. The 2030 standard will be measured with new EPC metrics, so treat these figures as a guide. Landlord guidance on GOV.UK

Upgrades recommended for homes in SE10 0

Where SE10 0 differs from the rest of SE10. For every upgrade and its typical cost, see SE10.

  • Solid wall insulation (internal or external)

    On 10% of EPCs here (SE10: 22%). 10% of homes here have solid walls with no insulation.

    Typical cost: £4,000–£14,000
  • Double glazing

    On 3% of EPCs here (SE10: 10%). 3% of homes aren't fully double or triple glazed.

    Typical cost: £3,300–£6,500

With all its recommended upgrades, 98% of homes here could reach a C rating or better.

On EPCs issued since 2021, most homes here show little or no saving from their recommended upgrades, often because they're already efficient.

Map of SE10 0 and nearby areas

How SE10 0 compares with the postcode sectors around it.

E14 0, London: C 79E14 2, London: C 78E14 3, London: C 73E14 4, London: B 81E14 5, London: C 77E14 6, London: C 76E14 7, London: C 74E14 8, London: C 75E14 9, London: B 81E16 1, London: C 80E16 2, London: B 81E16 3, London: C 70E16 4, London: C 73E16 9: not enough EPCs to showE22 2, London: B 84E22 3, London: B 86E3 4, London: C 74E6 5, London: C 70E6 6, London: D 67SE10 1: not enough EPCs to showSE10 8, London: C 72SE10 9, London: C 74SE13 7, London: C 73SE14 5, London: C 69SE14 6, London: C 72SE16 5, London: C 73SE16 6, London: C 71SE16 7, London: C 77SE18 3, London: D 66SE18 4, London: C 72SE18 5, London: C 71SE3 0, London: D 64SE3 7, London: D 66SE3 8, London: D 65SE7 7, London: C 71SE7 8, London: D 68SE8 3, London: C 77SE8 4, London: C 72SE8 5, London: C 74E14 2C 78E14 3C 73E14 5C 77E16 1C 80E16 9SE10 8C 72SE3 7D 66SE7 7C 71SE7 8D 68SE8 3C 77SE10 0C 80E14 0C 79E14 2C 78E14 3C 73E14 4B 81E14 5C 77E14 7C 74E16 1C 80E16 2B 81E16 9SE10 8C 72SE10 9C 74SE3 7D 66SE7 7C 71SE7 8D 68SE8 3C 77SE10 0C 80
Colour shows each area's average rating. Tap an area to open it. A 92–100 B 81–91 C 69–80 D 55–68 E 39–54 F 21–38 G 1–20 SE10 0 Not enough EPCs

Bordering postcode sectors

Common questions

What holds energy ratings back in SE10 0?

Older homes, uninsulated walls and lofts, and electric or oil heating all pull ratings down.

What is a postcode sector?

A postcode sector is the part of a postcode before the last two letters. SE10 0 covers every postcode that starts SE10 0, usually a few thousand homes. It's part of the SE10 postcode district.

Can I see the rating for my own home?

Yes. Individual certificates are on the official EPC Register on GOV.UK. EPCMap only shows figures for whole areas.