Skip to content
EPCMap

How energy efficient are homes in EN2 0 (Enfield)?

Summary

Average rating

D63

EN2 average: D 65

Homes in EN2 0 have an average EPC rating of D (63), a little below the EN2 average of D (65). 56% of homes here have solid walls with no insulation.

Rated D or worse
66%
EN2: 56%
Typical yearly energy cost
£1,032
EPCs since 2021, at prices then
Built before 1930
35%

For landlords: 63% of privately rented homes here are below C (713 homes), the minimum from October 2030. See the 2030 rules

How ratings are spread

Share of homes in each band, with the score range for each. The dark line marks the EN2 average.

  • Band A, score 92 to 100: 0% of homes; EN2 <1%.
  • Band B, score 81 to 91: 4% of homes; EN2 10%.
  • Band C, score 69 to 80: 30% of homes; EN2 34%.
  • Band D, score 55 to 68: 47% of homes; EN2 38%.
  • Band E, score 39 to 54: 17% of homes; EN2 14%.
  • Band F, score 21 to 38: 2% of homes; EN2 2%.
  • Band G, score 1 to 20: <1% of homes; EN2 <1%.

Based on the latest energy performance certificate (EPC) for each of 2,965 homes, up to October 2026. EPCs rate homes from A (most efficient) to G (least), with a score out of 100. EN2 0 is a postcode sector: every postcode that starts EN2 0.

Other postcode sectors in EN2

EN2 0 has the 4th highest average rating of the 5 sectors in EN2 with enough EPCs to show.

What homes here are like

What EPC assessors recorded when they visited homes in EN2 0.

Main heating

Gas boiler76%
Electric storage heaters16%
Other electric heating7%

Walls, roof and windows

Solid walls, not insulated57%
Cavity walls, not insulated11%
Cavity walls, insulated18%
Solid walls, insulated1%
Other walls (timber, system-built or modern)13%
Loft insulation under 100 mm (homes with a loft)45%
Double or triple glazing throughout83%

Ratings by type of home

Flats usually rate higher than houses because they lose less heat through shared walls, floors and ceilings.

Type of homeShare of homesAverage ratingRated D or worse
Detached house2%D 56EN2: D 5982%
Semi-detached house16%D 57EN2: D 6089%
Terraced house37%D 61EN2: D 6477%
Bungalow1%D 59EN2: D 5979%
Flat or maisonette44%D 67EN2: C 6948%

Typical floor area is the median. Types with fewer than 20 homes here aren't shown.

Privately rented homes and the 2030 standard

Landlords need an EPC rating of at least E to let a home today. From 1 October 2030, privately rented homes in England and Wales will need a C or better, unless the landlord registers an exemption.

63%

of privately rented homes here are below C (713 homes)

EN2: 51%

  • 88% of those could reach C with the upgrades listed on their EPC.
  • &lt;1% are rated F or G, below today's minimum of E (EN2: <1%).

From homes whose latest EPC was for a private let. A home sold or let differently since may be counted in the wrong group. The 2030 standard will be measured with new EPC metrics, so treat these figures as a guide. Landlord guidance on GOV.UK

Upgrades recommended for homes in EN2 0

Where EN2 0 differs from the rest of EN2. For every upgrade and its typical cost, see EN2.

  • Solid wall insulation (internal or external)

    On 59% of EPCs here (EN2: 36%). 56% of homes here have solid walls with no insulation.

    Typical cost: £4,000–£14,000
  • Cavity wall insulation

    On 13% of EPCs here (EN2: 23%). 11% of homes here have unfilled cavity walls.

    Typical cost: £500–£1,500

With all its recommended upgrades, 89% of homes here could reach a C rating or better.

On EPCs issued since 2021, making every recommended upgrade would cut the typical home's energy cost by about £237 a year, at the prices used when each EPC was issued.

Map of EN2 0 and nearby areas

How EN2 0 compares with the postcode sectors around it.

EN1 1, Enfield: D 65EN1 2, Enfield: D 64EN1 3, Enfield: D 63EN1 4, Enfield: D 68EN2 6, Enfield: D 66EN2 7, Enfield: D 66EN2 8, Enfield: D 68EN2 9, Enfield: D 61EN4 0, Barnet: C 71N14 4, London: D 67N21 1, London: D 65N21 2, London: D 63EN1 3D 63EN2 6D 66EN2 7D 66EN2 0D 63EN1 3D 63EN2 6D 66EN2 7D 66EN2 0D 63
Colour shows each area's average rating. Tap an area to open it. A 92–100 B 81–91 C 69–80 D 55–68 E 39–54 F 21–38 G 1–20 EN2 0 Not enough EPCs

Bordering postcode sectors

Common questions

What holds energy ratings back in EN2 0?

About 57% of homes here have solid walls with no insulation, which lose much more heat than insulated walls. 35% were built before 1930. Older homes, uninsulated walls and lofts, and electric or oil heating all pull ratings down.

What is a postcode sector?

A postcode sector is the part of a postcode before the last two letters. EN2 0 covers every postcode that starts EN2 0, usually a few thousand homes. It's part of the EN2 postcode district.

Can I see the rating for my own home?

Yes. Individual certificates are on the official EPC Register on GOV.UK. EPCMap only shows figures for whole areas.