Skip to content
EPCMap

How energy efficient are homes in DT2 0 (Dorchester, Dorset)?

Summary

Average rating

E53

DT2 average: D 60

Homes in DT2 0 have an average EPC rating of E (53), well below the DT2 average of D (60). 36% of homes here have solid walls with no insulation.

Rated D or worse
83%
DT2: 65%
Typical yearly energy cost
£1,719
EPCs since 2021, at prices then
Built before 1930
38%

For landlords: 93% of privately rented homes here are below C (215 homes), the minimum from October 2030. See the 2030 rules

How ratings are spread

Share of homes in each band, with the score range for each. The dark line marks the DT2 average.

  • Band A, score 92 to 100: 1% of homes; DT2 1%.
  • Band B, score 81 to 91: 5% of homes; DT2 10%.
  • Band C, score 69 to 80: 12% of homes; DT2 24%.
  • Band D, score 55 to 68: 30% of homes; DT2 32%.
  • Band E, score 39 to 54: 36% of homes; DT2 23%.
  • Band F, score 21 to 38: 14% of homes; DT2 8%.
  • Band G, score 1 to 20: 3% of homes; DT2 2%.

Based on the latest energy performance certificate (EPC) for each of 1,306 homes, up to October 2026. EPCs rate homes from A (most efficient) to G (least), with a score out of 100. DT2 0 is a postcode sector: every postcode that starts DT2 0.

Other postcode sectors in DT2

DT2 0 has the lowest average rating of the 4 sectors in DT2 with enough EPCs to show.

What homes here are like

What EPC assessors recorded when they visited homes in DT2 0.

Main heating

Oil boiler59%
Electric storage heaters24%
Other electric heating9%
Heat pump5%
Gas boiler2%
Communal or district heating1%

Walls, roof and windows

Solid walls, not insulated36%
Cavity walls, not insulated13%
Cavity walls, insulated38%
Solid walls, insulated3%
Other walls (timber, system-built or modern)11%
Loft insulation under 100 mm (homes with a loft)15%
Double or triple glazing throughout78%
Solar panels4%

Ratings by type of home

Flats usually rate higher than houses because they lose less heat through shared walls, floors and ceilings.

Type of homeShare of homesAverage ratingRated D or worse
Detached house33%E 53DT2: D 6182%
Semi-detached house19%E 51DT2: D 5988%
Terraced house25%E 52DT2: D 6184%
Bungalow18%D 57DT2: D 5877%
Flat or maisonette5%D 55DT2: D 6877%

Typical floor area is the median. Types with fewer than 20 homes here aren't shown.

Privately rented homes and the 2030 standard

Landlords need an EPC rating of at least E to let a home today. From 1 October 2030, privately rented homes in England and Wales will need a C or better, unless the landlord registers an exemption.

93%

of privately rented homes here are below C (215 homes)

DT2: 83%

  • 89% of those could reach C with the upgrades listed on their EPC.
  • 15% are rated F or G, below today's minimum of E (DT2: 6%).

From homes whose latest EPC was for a private let. A home sold or let differently since may be counted in the wrong group. The 2030 standard will be measured with new EPC metrics, so treat these figures as a guide. Landlord guidance on GOV.UK

Upgrades recommended for homes in DT2 0

Where DT2 0 differs from the rest of DT2. For every upgrade and its typical cost, see DT2.

  • Solid wall insulation (internal or external)

    On 35% of EPCs here (DT2: 21%). 36% of homes here have solid walls with no insulation.

    Typical cost: £4,000–£14,000
  • Modern storage heaters

    On 21% of EPCs here (DT2: 11%). 33% of homes here are heated by electricity.

    Typical cost: £1,200–£1,800
  • Insulated external doors

    On 11% of EPCs here (DT2: 5%).

    Typical cost: £1,500
  • Hot water cylinder insulation

    On 18% of EPCs here (DT2: 13%).

    Typical cost: £15–£30
  • Double glazing

    On 19% of EPCs here (DT2: 13%). 22% of homes aren't fully double or triple glazed.

    Typical cost: £3,300–£6,500

With all its recommended upgrades, 81% of homes here could reach a C rating or better.

On EPCs issued since 2021, making every recommended upgrade would cut the typical home's energy cost by about £497 a year, at the prices used when each EPC was issued.

Map of DT2 0 and nearby areas

How DT2 0 compares with the postcode sectors around it.

BA20 1, Yeovil: D 67BA20 2, Yeovil: D 66BA21 3, Yeovil: C 69BA21 4, Yeovil: D 67BA21 5, Yeovil: C 71BA22 8, Yeovil: C 69BA22 9, Yeovil: D 57BA8 0, Templecombe: D 60BH20 5, Wareham: D 57DT1 1, Dorchester: C 70DT1 2, Dorchester: D 66DT1 3, Dorchester: C 80DT10 1, Sturminster Newton: D 67DT10 2, Sturminster Newton: D 64DT11 0, Blandford Forum: D 63DT2 7, Dorchester: D 56DT2 8, Dorchester: D 65DT2 9, Dorchester: D 63DT3 4, Weymouth: D 68DT3 5, Weymouth: D 67DT3 6, Weymouth: C 70DT6 3, Bridport: D 64DT6 4, Bridport: D 63DT6 5, Bridport: D 65DT6 6, Bridport: D 58DT7 3, Lyme Regis: D 62DT8 3, Beaminster: D 61DT9 3, Sherborne: D 64DT9 4, Sherborne: D 65DT9 5, Sherborne: D 63DT9 6, Sherborne: D 61EX13 5, Axminster: D 68EX13 7, Axminster: E 52SP8 5, Gillingham: D 56TA10 0, Langport: D 58TA12 6, Martock: D 66TA13 5, South Petherton: D 66TA14 6, Stoke-Sub-Hamdon: D 62TA15 6, Montacute: D 60TA16 5, Merriott: D 66TA17 8, Hinton St. George: D 59TA18 7, Crewkerne: D 61TA18 8, Crewkerne: D 65TA19 0, Ilminster: D 62TA19 9, Ilminster: D 64TA20 1, Chard: C 69TA20 2, Chard: C 69TA20 3, Chard: E 53TA20 4, Chard: D 55TA3 5, Taunton: D 62TA3 6, Taunton: D 59BA22 9D 57DT1 1C 70DT10 2D 64DT2 7D 56DT6 3D 64DT6 4D 63DT6 6D 58DT8 3D 61DT9 5D 63TA19 0D 62TA20 4D 55DT2 0E 53BA20 2D 66BA22 9D 57DT1 1C 70DT10 2D 64DT2 7D 56DT2 8D 65DT2 9D 63DT6 3D 64DT6 4D 63DT6 5D 65DT6 6D 58DT8 3D 61DT9 5D 63DT9 6D 61TA13 5D 66TA17 8D 59TA18 7D 61TA18 8D 65TA19 9D 64TA20 4D 55DT2 0E 53
Colour shows each area's average rating. Tap an area to open it. A 92–100 B 81–91 C 69–80 D 55–68 E 39–54 F 21–38 G 1–20 DT2 0 Not enough EPCs

Bordering postcode sectors

Common questions

What holds energy ratings back in DT2 0?

About 36% of homes here have solid walls with no insulation, which lose much more heat than insulated walls. 38% were built before 1930. Older homes, uninsulated walls and lofts, and electric or oil heating all pull ratings down.

What is a postcode sector?

A postcode sector is the part of a postcode before the last two letters. DT2 0 covers every postcode that starts DT2 0, usually a few thousand homes. It's part of the DT2 postcode district.

Can I see the rating for my own home?

Yes. Individual certificates are on the official EPC Register on GOV.UK. EPCMap only shows figures for whole areas.