Skip to content
EPCMap

How energy efficient are homes in CT2 0 (Canterbury)?

Summary

Average rating

C70

CT2 average: D 68

Homes in CT2 0 have an average EPC rating of C (70), a little above the CT2 average of D (68).

Rated D or worse
44%
CT2: 44%
Typical yearly energy cost
£766
EPCs since 2021, at prices then
Built before 1930
10%

For landlords: 58% of privately rented homes here are below C (136 homes), the minimum from October 2030. See the 2030 rules

How ratings are spread

Share of homes in each band, with the score range for each. The dark line marks the CT2 average.

  • Band A, score 92 to 100: 1% of homes; CT2 <1%.
  • Band B, score 81 to 91: 27% of homes; CT2 12%.
  • Band C, score 69 to 80: 28% of homes; CT2 43%.
  • Band D, score 55 to 68: 33% of homes; CT2 35%.
  • Band E, score 39 to 54: 10% of homes; CT2 8%.
  • Band F, score 21 to 38: 2% of homes; CT2 1%.
  • Band G, score 1 to 20: <1% of homes; CT2 <1%.

Based on the latest energy performance certificate (EPC) for each of 2,165 homes, up to October 2026. EPCs rate homes from A (most efficient) to G (least), with a score out of 100. CT2 0 is a postcode sector: every postcode that starts CT2 0.

Other postcode sectors in CT2

CT2 0 has the highest average rating of the 4 sectors in CT2 with enough EPCs to show.

What homes here are like

What EPC assessors recorded when they visited homes in CT2 0.

Main heating

Gas boiler93%
Oil boiler2%
Communal or district heating2%
Electric storage heaters2%

Walls, roof and windows

Solid walls, not insulated7%
Cavity walls, not insulated18%
Cavity walls, insulated45%
Other walls (timber, system-built or modern)29%
Loft insulation under 100 mm (homes with a loft)24%
Double or triple glazing throughout91%
Solar panels2%

Ratings by type of home

Flats usually rate higher than houses because they lose less heat through shared walls, floors and ceilings.

Type of homeShare of homesAverage ratingRated D or worse
Detached house18%C 73CT2: D 6737%
Semi-detached house31%D 68CT2: D 6654%
Terraced house18%C 75CT2: C 6929%
Bungalow20%D 63CT2: D 6367%
Flat or maisonette13%C 75CT2: C 7314%

Typical floor area is the median. Types with fewer than 20 homes here aren't shown.

Privately rented homes and the 2030 standard

Landlords need an EPC rating of at least E to let a home today. From 1 October 2030, privately rented homes in England and Wales will need a C or better, unless the landlord registers an exemption.

58%

of privately rented homes here are below C (136 homes)

CT2: 41%

  • 96% of those could reach C with the upgrades listed on their EPC.
  • 2% are rated F or G, below today's minimum of E (CT2: <1%).

From homes whose latest EPC was for a private let. A home sold or let differently since may be counted in the wrong group. The 2030 standard will be measured with new EPC metrics, so treat these figures as a guide. Landlord guidance on GOV.UK

Upgrades recommended for homes in CT2 0

Where CT2 0 differs from the rest of CT2. For every upgrade and its typical cost, see CT2.

  • Cavity wall insulation

    On 19% of EPCs here (CT2: 26%). 18% of homes here have unfilled cavity walls.

    Typical cost: £500–£1,500

With all its recommended upgrades, 96% of homes here could reach a C rating or better.

On EPCs issued since 2021, making every recommended upgrade would cut the typical home's energy cost by about £79 a year, at the prices used when each EPC was issued.

Map of CT2 0 and nearby areas

How CT2 0 compares with the postcode sectors around it.

CT1 1, Canterbury: C 70CT1 2, Canterbury: C 69CT1 3, Canterbury: C 69CT2 7, Canterbury: C 69CT2 8, Canterbury: D 68CT2 9, Canterbury: D 64CT3 1, Canterbury: D 64CT3 3, Canterbury: C 75CT3 4, Canterbury: D 66CT4 5, Canterbury: D 59CT4 7, Canterbury: D 66CT5 1, Whitstable: D 67CT5 2, Whitstable: D 65CT5 3, Whitstable: C 70CT5 4, Whitstable: D 66CT6 5, Herne Bay: D 68CT6 6, Herne Bay: D 68CT6 7, Herne Bay: C 69CT6 8, Herne Bay: D 64CT7 0, Birchington: D 67ME13 9, Faversham: D 62CT1 1C 70CT1 3C 69CT2 8D 68CT2 9D 64CT3 1D 64CT3 4D 66CT5 1D 67CT5 3C 70CT6 7C 69CT2 0C 70CT1 1C 70CT1 3C 69CT2 7C 69CT2 8D 68CT2 9D 64CT3 1D 64CT3 4D 66CT5 1D 67CT5 3C 70CT6 7C 69CT2 0C 70
Colour shows each area's average rating. Tap an area to open it. A 92–100 B 81–91 C 69–80 D 55–68 E 39–54 F 21–38 G 1–20 CT2 0 Not enough EPCs

Bordering postcode sectors

Common questions

What holds energy ratings back in CT2 0?

Older homes, uninsulated walls and lofts, and electric or oil heating all pull ratings down.

What is a postcode sector?

A postcode sector is the part of a postcode before the last two letters. CT2 0 covers every postcode that starts CT2 0, usually a few thousand homes. It's part of the CT2 postcode district.

Can I see the rating for my own home?

Yes. Individual certificates are on the official EPC Register on GOV.UK. EPCMap only shows figures for whole areas.