Skip to content
EPCMap

How energy efficient are homes in BL0 0 (Bury)?

Summary

Average rating

D65

BL0 average: D 65

Homes in BL0 0 have an average EPC rating of D (65), about the same as the BL0 average of D (65). 43% of homes here were built before 1930, and 39% have solid walls with no insulation.

Rated D or worse
62%
BL0: 61%
Typical yearly energy cost
£1,256
EPCs since 2021, at prices then
Built before 1930
43%

For landlords: 62% of privately rented homes here are below C (216 homes), the minimum from October 2030. See the 2030 rules

How ratings are spread

Share of homes in each band, with the score range for each. The dark line marks the BL0 average.

  • Band A, score 92 to 100: 2% of homes; BL0 <1%.
  • Band B, score 81 to 91: 7% of homes; BL0 6%.
  • Band C, score 69 to 80: 30% of homes; BL0 32%.
  • Band D, score 55 to 68: 46% of homes; BL0 45%.
  • Band E, score 39 to 54: 15% of homes; BL0 14%.
  • Band F, score 21 to 38: 2% of homes; BL0 2%.
  • Band G, score 1 to 20: <1% of homes; BL0 <1%.

Based on the latest energy performance certificate (EPC) for each of 1,949 homes, up to October 2026. EPCs rate homes from A (most efficient) to G (least), with a score out of 100. BL0 0 is a postcode sector: every postcode that starts BL0 0.

Other postcode sectors in BL0

BL0 0 has the highest average rating of the 2 sectors in BL0 with enough EPCs to show.

What homes here are like

What EPC assessors recorded when they visited homes in BL0 0.

Main heating

Gas boiler93%
Communal or district heating2%
Oil boiler1%
Other electric heating1%
Electric storage heaters1%

Walls, roof and windows

Solid walls, not insulated39%
Cavity walls, not insulated15%
Cavity walls, insulated36%
Solid walls, insulated3%
Other walls (timber, system-built or modern)8%
Loft insulation under 100 mm (homes with a loft)33%
Double or triple glazing throughout93%

Ratings by type of home

Flats usually rate higher than houses because they lose less heat through shared walls, floors and ceilings.

Type of homeShare of homesAverage ratingRated D or worse
Detached house15%C 70BL0: D 6645%
Semi-detached house17%D 64BL0: D 6470%
Terraced house52%D 62BL0: D 6272%
Bungalow5%D 64BL0: D 6370%
Flat or maisonette12%C 72BL0: C 7125%

Typical floor area is the median. Types with fewer than 20 homes here aren't shown.

Privately rented homes and the 2030 standard

Landlords need an EPC rating of at least E to let a home today. From 1 October 2030, privately rented homes in England and Wales will need a C or better, unless the landlord registers an exemption.

62%

of privately rented homes here are below C (216 homes)

BL0: 60%

  • 99% of those could reach C with the upgrades listed on their EPC.
  • &lt;1% are rated F or G, below today's minimum of E (BL0: <1%).

From homes whose latest EPC was for a private let. A home sold or let differently since may be counted in the wrong group. The 2030 standard will be measured with new EPC metrics, so treat these figures as a guide. Landlord guidance on GOV.UK

Upgrades recommended for homes in BL0 0

Where BL0 0 differs from the rest of BL0. For every upgrade and its typical cost, see BL0.

  • Solid wall insulation (internal or external)

    On 40% of EPCs here (BL0: 31%). 39% of homes here have solid walls with no insulation.

    Typical cost: £4,000–£14,000

With all its recommended upgrades, 94% of homes here could reach a C rating or better.

On EPCs issued since 2021, making every recommended upgrade would cut the typical home's energy cost by about £169 a year, at the prices used when each EPC was issued.

Map of BL0 0 and nearby areas

How BL0 0 compares with the postcode sectors around it.

BB1 2, Blackburn: D 66BB3 3, Darwen: C 69BB4 4, Rossendale: D 65BB4 5, Rossendale: D 63BB4 6, Rossendale: D 65BB4 7, Rossendale: D 65BB4 8, Rossendale: D 64BB4 9, Rossendale: D 61BB5 3, Accrington: D 65BL0 9, Bury: D 64BL2 3, Bolton: D 64BL2 4, Bolton: D 63BL7 0, Bolton: D 62BL7 9, Bolton: D 65BL8 1, Bury: D 66BL8 3, Bury: D 64BL8 4, Bury: D 62BL9 5, Bury: D 63BL9 6, Bury: C 69BL9 7, Bury: D 65OL10 4, Heywood: D 67OL11 1, Rochdale: D 66OL11 3, Rochdale: D 68OL11 4, Rochdale: D 65OL11 5, Rochdale: D 65OL12 0, Rochdale: D 66OL12 6, Rochdale: D 67OL12 7, Rochdale: D 66OL12 8, Rochdale: D 66OL12 9, Rochdale: C 69OL13 0, Bacup: D 63OL13 8, Bacup: D 62OL13 9, Bacup: D 67OL14 7, Todmorden: D 63OL14 8, Todmorden: D 61OL16 1, Rochdale: C 72BB4 4D 65BB4 6D 65BB4 7D 65BL0 9D 64BL9 6C 69OL11 5D 65OL12 6D 67OL13 0D 63BL0 0D 65BB4 4D 65BB4 5D 63BB4 6D 65BB4 7D 65BL0 9D 64BL7 0D 62BL8 4D 62BL9 5D 63BL9 6C 69OL11 5D 65OL12 6D 67OL12 7D 66OL13 0D 63OL13 9D 67BL0 0D 65
Colour shows each area's average rating. Tap an area to open it. A 92–100 B 81–91 C 69–80 D 55–68 E 39–54 F 21–38 G 1–20 BL0 0 Not enough EPCs

Bordering postcode sectors

Common questions

What holds energy ratings back in BL0 0?

About 39% of homes here have solid walls with no insulation, which lose much more heat than insulated walls. 43% were built before 1930. Older homes, uninsulated walls and lofts, and electric or oil heating all pull ratings down.

What is a postcode sector?

A postcode sector is the part of a postcode before the last two letters. BL0 0 covers every postcode that starts BL0 0, usually a few thousand homes. It's part of the BL0 postcode district.

Can I see the rating for my own home?

Yes. Individual certificates are on the official EPC Register on GOV.UK. EPCMap only shows figures for whole areas.