Skip to content
EPCMap

How energy efficient are homes in FY3 0 (Blackpool)?

Summary

Average rating

D68

FY3 average: D 64

Homes in FY3 0 have an average EPC rating of D (68), a little above the FY3 average of D (64).

Rated D or worse
46%
FY3: 61%
Typical yearly energy cost
£1,188
EPCs since 2021, at prices then
Built before 1930
6%

For landlords: 59% of privately rented homes here are below C (51 homes), the minimum from October 2030. See the 2030 rules

How ratings are spread

Share of homes in each band, with the score range for each. The dark line marks the FY3 average.

  • Band A, score 92 to 100: <1% of homes; FY3 <1%.
  • Band B, score 81 to 91: 23% of homes; FY3 6%.
  • Band C, score 69 to 80: 31% of homes; FY3 32%.
  • Band D, score 55 to 68: 32% of homes; FY3 45%.
  • Band E, score 39 to 54: 11% of homes; FY3 13%.
  • Band F, score 21 to 38: 2% of homes; FY3 2%.
  • Band G, score 1 to 20: <1% of homes; FY3 <1%.

Based on the latest energy performance certificate (EPC) for each of 726 homes, up to October 2026. EPCs rate homes from A (most efficient) to G (least), with a score out of 100. FY3 0 is a postcode sector: every postcode that starts FY3 0.

Other postcode sectors in FY3

FY3 0 has the highest average rating of the 4 sectors in FY3 with enough EPCs to show.

What homes here are like

What EPC assessors recorded when they visited homes in FY3 0.

Main heating

Gas boiler95%
Other electric heating2%
Heat pump1%
Other or unrecorded1%

Walls, roof and windows

Solid walls, not insulated3%
Cavity walls, not insulated23%
Cavity walls, insulated49%
Other walls (timber, system-built or modern)25%
Loft insulation under 100 mm (homes with a loft)24%
Double or triple glazing throughout94%
Solar panels1%

Ratings by type of home

Flats usually rate higher than houses because they lose less heat through shared walls, floors and ceilings.

Type of homeShare of homesAverage ratingRated D or worse
Detached house37%C 72FY3: D 6431%
Semi-detached house23%D 63FY3: D 6268%
Terraced house23%C 70FY3: D 6538%
Bungalow12%D 60FY3: D 6068%
Flat or maisonette3%D 64FY3: D 6752%

Typical floor area is the median. Types with fewer than 20 homes here aren't shown.

Privately rented homes and the 2030 standard

Landlords need an EPC rating of at least E to let a home today. From 1 October 2030, privately rented homes in England and Wales will need a C or better, unless the landlord registers an exemption.

59%

of privately rented homes here are below C (51 homes)

FY3: 61%

  • 100% of those could reach C with the upgrades listed on their EPC.
  • 4% are rated F or G, below today's minimum of E (FY3: 1%).

From homes whose latest EPC was for a private let. A home sold or let differently since may be counted in the wrong group. The 2030 standard will be measured with new EPC metrics, so treat these figures as a guide. Landlord guidance on GOV.UK

Upgrades recommended for homes in FY3 0

Where FY3 0 differs from the rest of FY3. For every upgrade and its typical cost, see FY3.

  • Floor insulation

    On 50% of EPCs here (FY3: 66%).

    Typical cost: £4,000–£6,000
  • Solar water heating

    On 78% of EPCs here (FY3: 62%).

    Typical cost: £4,000–£6,000
  • Cavity wall insulation

    On 23% of EPCs here (FY3: 35%). 23% of homes here have unfilled cavity walls.

    Typical cost: £500–£1,500
  • Heating controls

    On 22% of EPCs here (FY3: 28%).

    Typical cost: £350–£450

With all its recommended upgrades, 95% of homes here could reach a C rating or better.

On EPCs issued since 2021, making every recommended upgrade would cut the typical home's energy cost by about £130 a year, at the prices used when each EPC was issued.

Map of FY3 0 and nearby areas

How FY3 0 compares with the postcode sectors around it.

FY1 1, Blackpool: D 62FY1 2, Blackpool: D 63FY1 3, Blackpool: D 65FY1 4, Blackpool: D 63FY1 5, Blackpool: D 63FY1 6, Blackpool: D 62FY2 0, Blackpool: D 65FY2 9, Blackpool: D 61FY3 7, Blackpool: D 65FY3 8, Blackpool: D 64FY3 9, Blackpool: D 62FY4 1, Blackpool: D 61FY4 2, Blackpool: D 60FY4 3, Blackpool: D 63FY4 4, Blackpool: D 65FY4 5, Blackpool: C 69FY6 7, Poulton-Le-Fylde: D 68FY6 8, Poulton-Le-Fylde: D 65PR3 0, Preston: C 71PR4 2, Preston: C 69PR4 3, Preston: C 70FY1 4D 63FY1 6D 62FY2 0D 65FY3 7D 65FY3 8D 64FY3 9D 62FY4 4D 65FY6 7D 68FY6 8D 65FY3 0D 68FY1 2D 63FY1 3D 65FY1 4D 63FY1 6D 62FY2 0D 65FY2 9D 61FY3 7D 65FY3 8D 64FY3 9D 62FY4 4D 65FY6 7D 68FY6 8D 65FY3 0D 68
Colour shows each area's average rating. Tap an area to open it. A 92–100 B 81–91 C 69–80 D 55–68 E 39–54 F 21–38 G 1–20 FY3 0 Not enough EPCs

Bordering postcode sectors

Common questions

What holds energy ratings back in FY3 0?

Older homes, uninsulated walls and lofts, and electric or oil heating all pull ratings down.

What is a postcode sector?

A postcode sector is the part of a postcode before the last two letters. FY3 0 covers every postcode that starts FY3 0, usually a few thousand homes. It's part of the FY3 postcode district.

Can I see the rating for my own home?

Yes. Individual certificates are on the official EPC Register on GOV.UK. EPCMap only shows figures for whole areas.